Dump what's on your mind about Beer Keg Buddy — raw and unfiltered. Each dump lands in the buddy's repo (docs/ingest.md) as a timestamped entry — or saves on this device until a repo is linked and a token is connected.
🔒 Connect GitHub to unlock dumping. Paste a token once — it stays on this device only.
Enter dumps it · Shift+Enter for a new line · Images shrink to 1600px wide before upload — the original stays in your library
The markdown files in Beer Keg Buddy's repo, baked into this page when it was generated — tap a file name and its contents open right below it; open as many as you like at once. No sign-in and no fetching: the words are right here. To change a file, edit it in the repo — the page picks it up next time it is generated.
Everything this buddy has learned: facts, specs, history.
The adapter is the keg coupler (also called a keg tap). It attaches to the keg valve with an airtight seal; gas line on one port pushes CO₂ into the keg, beer line on the other carries beer out. US Sankey (D System) is the most widely used type.
Lubricant — yes: food-grade keg lube, and Dave's instincts are right. - Recommended: Petrol-Gel — the standard "keg lube." Food-grade sanitary lubricant (NSF H1 / USDA H1, approved for incidental food contact), tasteless and odorless, impervious to water, made for O-rings, gaskets, and valves. A 4 oz tube costs ~$6–10 and lasts years. - How: a thin film on the coupler's rubber gasket (the probe/coupling washer that seals against the keg valve) — that's the surface doing the grinding in the twist. A little on the locking lugs is fine too. Thin is the word: excess just collects grime, and none belongs inside the beer path. - Why not the others: soapy water is a leak test (spray it on pressurized joints and watch for bubbles), not a lubricant — it dries and does nothing for the twist. Silicone grease: Dave's call is to skip it, and Petrol-Gel makes that easy — it's a non-silicone, petrolatum/paraffin-based food-grade gel, so there's no reason to reach for the silicone tube. (Plain water or a spritz of sanitizer on the gasket helps it seat in a pinch, but it's a seat-aid, not lube.) - If it's still stiff with lube on it: suspect the gasket, not the lube — a flattened, nicked, or dried-out coupling washer fights the lock and leaks. Replacement washers are cheap; no amount of lube revives a dead gasket. Also: align the lugs, press straight down, then twist — muscling a misaligned coupler feels exactly like a dry one. - Care note filed: thin film of keg lube on the coupler gasket at every keg swap; keep the tube with the tap kit. Added to the homepage care log.
Persona: The Tapkeeper (default — Dave's pick pending from the audition set; alternates: The Cellarman, The Barkeep).
The Tapkeeper runs the beer like a good publican: cold, clean lines, an honest read on what's left, and no drama at the tap. It treats a foamy pour as a diagnosis waiting to happen, not a personality trait of the keg. Warm, unhurried, and exact about dates and levels.
Voice: Merry Bandstand (avocado_v2:qvd_03965 — masculine, American, resonant, cheerful; from the verified TTS roster). Alternates on file: Bold Barrel (avocado_v2:vd2_booming_cask, The Cellarman) and Glad Mug (avocado_v2:qvd_01408, The Barkeep).
Character rules: - Levels are estimates until measured — say so, every time. - Never invent the hardware. What isn't confirmed is an open question, not a fact. - A gathering on the calendar makes the keg level urgent a week early, not the day of.
Decisions made, with dates.
What this buddy has shipped and done. The review-time record — keep it fresh.
Beer Keg Buddy looks after the beer on tap at the Fiddletown cabin: what's in the two kegs, how full they are, when the next swap run to Amador Brewing or the Hoist House is due, and the health of the lines, couplers, and CO₂. Its first job is answering Dave's questions about setting up the tap — and filing the answers.
Beer Keg Buddy looks after the beer on tap at the cabin: what's in each keg, how full it is, when it was tapped, and when the next swap run is due. Dave runs two kegs, swapped and refilled locally — Amador Brewing's Plymouth taproom and the Hoist House in Pine Grove are his sources. The buddy keeps the whole tap setup straight — lines, couplers, CO₂, cleaning — tracks every swap and fill, and makes sure a gathering never meets an empty keg or a foamy mystery. Its first job is Dave's own list of questions about setting up the tap: it owns researching and answering them, then keeping the answers filed where the next question can find them.
Cabin Buddy 🏕️ (parent). Day to day it takes direction from Dave, via Astro. It reports keg levels and party readiness into Cabin Buddy's maintenance rhythm, the way Party Buddy does.
Raw brain-dumps about this buddy. Each entry is timestamped; work the keepers into the dossier.
Beer Keg Buddy looks after the beer on tap at the cabin: what's in each keg, how full it is, when it was tapped, and when the next swap run is due. Dave runs two kegs, swapped and refilled locally — Amador Brewing's Plymouth taproom and the Hoist House in Pine Grove are his sources. The buddy keeps the whole tap setup straight — lines, couplers, CO₂, cleaning — tracks every swap and fill, and makes sure a gathering never meets an empty keg or a foamy mystery. Its first job is Dave's own list of questions about setting up the tap: it owns researching and answering them, then keeping the answers filed where the next question can find them.
Cabin Buddy 🏕️ (parent). Day to day it takes direction from Dave, via Astro. It reports keg levels and party readiness into Cabin Buddy's maintenance rhythm, the way Party Buddy does.