Fiddletown · Amador CountyResearch read 31 October 2026Long-term project — planning stage

Power beyond PG&E: solar + battery, priced honestly for 2026

You asked for alternatives to PG&E and a serious look at solar + battery for the Fiddletown house — well pump, hot tub, HVAC, Starlink, tree shade, and multi-day PSPS shutoffs included. The short version: there is no other wires utility to switch to, the 30% federal credit for buying a system is gone, and the battery is now the whole economics — but a well-designed system still pencils, and one property-tax deadline is still alive if you move in 2026.

Illustration of a foothill home beside a ground-mount solar array among oaks and pines at golden hour

Illustration — a ground-mount array in a clearing, one of the two siting options this research compares for a tree-shaded property. Not a depiction of the actual house.

The verdict in one paragraph

PG&E stays your delivery utility — no Community Choice Aggregator serves Amador County in October 2026, and none is coming in the October 2027 expansion either. What you can change is how much PG&E power you buy at 4–9 p.m. and whether the house stays up in a shutoff. For this house, the resilience-optimal design in the research is solar + 27–40 kWh of battery, optionally plus a propane standby generator — indicatively $50,000–$70,000 for a 10–12 kW rooftop build with 27–30 kWh of storage, before incentives that, for a purchase in 2026, are likely $0. Nothing can be sized responsibly until your 12 months of PG&E interval data is in hand.

33.7¢ /kWh

PG&E residential average, June 2026 Published
CPUC Public Advocates Office figure. Plan-level prices run far above and below it — see the rate table.

Source: CPUC Public Advocates Office, via rate trackers citing PG&E tariffs.

$0

Federal credit on a 2026 purchase Published
The §25D 30% Residential Clean Energy Credit is not available for any property placed in service after December 31, 2025 — solar, battery, or battery-only.

Source: IRS — Residential Clean Energy Credit (verified live 31 Oct 2026).

Jan 1, 2027

The one deadline still alive Published
California's property-tax exclusion for active solar becomes inoperative. A system that qualifies before that date keeps its exclusion until the property changes ownership; one completed in 2027 gets none.

Source: CA Board of Equalization, Letter to Assessors 2026/034 (Sep 1, 2026).

1 · The baseline

What PG&E power costs now

Bundled (generation + delivery) prices from PG&E Advice Letter 7846-E, effective March 1, 2026. PG&E's average actually fell about 3.7% on March 1, 2026 as wildfire cost-recovery charges ended — the durable feature isn't the average, it's the spread between evening peak and off-peak.

Summer prices compared — ¢ per kWh

The gap between what you pay at 6 p.m. and what exported solar earns at noon is the entire design problem.

E-ELEC summer peak (4–9pm)
55.2¢
E-TOU-C summer peak (4–9pm)
52.2¢
E-TOU-D summer peak (5–8pm, weekdays)
47.7¢
E-ELEC summer off-peak
33.4¢
EV2-A off-peak (lowest)
22.6¢
Exported solar at midday (NBT, typical)
~5–8¢

Plan prices Published — PG&E tariffs via Rate Relief CA and the NRG rate tracker (updated Oct 28, 2026). Export range: secondary compilations put the NBT average around $0.05–$0.08/kWh.

The $24/month you can't solar away

Since March 2026 every residential bill carries a Base Services Charge of $0.79343/day — about $24/month for most customers (~$12 FERA, ~$6 CARE) Published. Secondary sources citing PG&E state it cannot be offset by generation credits — budget roughly $290/year in fixed charges no grid-connected system erases.

Source: PG&E — restructured bill debuts March 2026.

Where rates may go — don't bank on either

Cal Advocates projects ~33.9¢/kWh by Dec 31, 2026 counting only filed requests — while warning the pending 2027 General Rate Case could raise average bills ~16% in 2027 and ~30% by 2030 if all PG&E requests are approved Published. Plan against the peak/off-peak spread, not a forecast.

2 · Net Billing Tariff

Why the battery is the system, not an add-on

The Net Billing Tariff (the successor to NEM 3.0, CPUC Decision 22-12-056, for interconnections on/after April 15, 2023) replaced retail-rate export credit with the Avoided Cost Calculator — a different export value for every hour of every month. It survived legal challenge; the California Supreme Court declined a final appeal in June 2026.

~3–8¢

What a kWh exported at noon earns, when the grid is saturated with solar

55.2¢

What that same kWh used yourself at 6 p.m. avoids buying (E-ELEC summer peak)

7–15×

Self-consumption is worth roughly this multiple of export at the hours that matter

What this changes in the design

  • Size the array to daytime load + battery charging, not to maximum export.
  • Store midday surplus and discharge through the 4–9 p.m. window.
  • Shift discretionary loads — well pumping where the pressure tank allows, hot-tub heating, laundry, any future EV — into solar hours.
  • A small number of late-summer evening hours (roughly 5–7 p.m., Aug–Oct) spike to $1–$4/kWh — hours solar alone can't serve, but a charged battery can.

Billing mechanics that are easy to miss

  • ACC export credits split into Supply and Transmission & Delivery components — each can only offset charges of the same type.
  • Credits bank monthly by type across an annual true-up.
  • Cash payment (Net Surplus Compensation) only if the home is a net exporter over the full year — a correctly sized system usually isn't, so leftover credits roll forward.
  • New solar customers are placed on E-ELEC — the CPUC requires it for the Net Billing Tariff.

Source: Energy Toolbase — PG&E NBT charge-type laning; CPUC adoption via Assembly analysis of AB 942.

Solar-only fails this house's brief

Under net billing, a solar-only system exports at cents, imports evenings at up to 55¢, and provides zero outage power — grid-tied inverters shut down when the grid does. It's the cheapest entry and the wrong product for a PSPS home with a well. That's why it isn't in the comparison table below.

3 · Incentives in 2026

The incentive reality, stated plainly

This is the single biggest change from prior years, and the section where sales claims are most likely to be wrong. Every row below carries the report's hedge exactly as researched on 31 October 2026.

Path2026 statusWhat it means for you
Purchased solar + battery — federal §25D$0Credit not available for property placed in service after Dec 31, 2025 (One Big Beautiful Bill Act, P.L. 119-21, signed July 4, 2025). Timing rule: the expenditure counts when installation is completed — signing or paying in 2025 never preserved it. No phase-down: 30% → 0% on Jan 1, 2026. §25C home-improvement credit ended the same day.
Battery-only — federal §25D$0 if homeowner-ownedStandalone storage (≥3 kWh) was eligible 2023–2025 and died with §25D. Treat any battery-only federal-credit claim from a salesperson as a red flag.
Lease / PPA — federal §48E (commercial)Survives — via the providerThe business that owns the system can claim generally 30%. You never claim it; it arrives only as a lower payment/rate, to the extent competition forces pass-through. Clock: if construction began after July 4, 2026, the system must be placed in service by Dec 31, 2027. Ask any provider in writing: “Is this system's 48E eligibility safe-harbored, and what is its placed-in-service deadline?”
SGIP — California battery rebateClosed (general & Equity Resiliency)Official tracker dated 10/28/2026: Small Residential Storage ($0.15/Wh) Closed in PG&E territory; Equity Resiliency ($1.00/Wh — historically the budget for Tier 2/3 fire-threat / PSPS homes like this one) Closed. Ratepayer budgets stopped accepting applications Dec 31, 2025. Planning rule: if not income-qualified, SGIP = $0 in any honest pro-forma.
RSSE — income-qualified solar & storage equityWaitlist (PG&E channel)AB 209-funded ($280M), broadly for households ≤80% of area median income plus specified enrollment pathways: $1.10/Wh storage + $3.10/W solar. Fully reserved within months; waitlist-only in PG&E territory. Joining the waitlist costs nothing — check eligibility before signing anything, since RSSE generally requires the reservation to precede / integrate with the project.
Property tax — CA §73 exclusionAlive until Jan 1, 2027Excludes an active solar system — expressly including its storage devices — from assessed value. SB 710 makes it inoperative Jan 1, 2027: previously excluded systems stay excluded until ownership changes; a system first completed after the cutoff gets no exclusion at all. The extension bill (AB 2389) died in May 2026. Confirm the “completed” test with the Amador County Assessor — a December start that slips is not automatically safe.
PG&E portable generator / battery rebateUncertain — sources conflict$300 per account (+$200 CARE/FERA) toward a qualifying portable generator or portable battery ≤1 kWh, for HFTD Tier 2/3 / High Fire Risk / EPSS customers, stated deadline Dec 31, 2026. One guide lists it open; another (Aug 27, 2026) reports PG&E saying the 2026 program is full and applications closed, check back Jan 2027. Verify on PG&E's backup-power page before buying. Does not apply to standby generators or whole-home batteries.
CARE / FERA / Medical BaselineActive35%+ / ~18% electric discounts, and they cut the Base Services Charge to ~$6 / ~$12. They stack with everything above. DAC-SASH (no-cost solar via GRID Alternatives, through 2030) requires CARE/FERA-level income and a top-25% disadvantaged-community tract — eligibility for a Fiddletown address was not verified and should not be assumed. No Amador County or Fiddletown local rebate was found; DSIRE ZIP search is the standard final check.

⚠ The stale-claim warning

The IRS page itself still contains a stale sentence about the credit phasing out in 2033, and many installer websites still advertise a “30% federal tax credit” for purchases. For a 2026 purchase, those claims are wrong. Do not sign any contract that claims a 30% federal credit on a 2026 purchase or counts a general-market SGIP rebate.

Sources: IRS · SGIP Incentive Step Tracker (data as of 10/28/2026) · EnergySage California (Oct 2026)

4 · Ownership models compared

Five ways to do it — one reference envelope

Reference envelope: 8–14 kW solar, 20–40 kWh battery, rural foothill home. Building blocks Published: California rooftop solar averaged $2.52/W in EnergySage's October 2026 marketplace data (10 kW ≈ $25,165); other 2026 guides put CA rooftop at $2.50–$3.50/W; ground-mount adds +$1.00–$1.50/W; installed battery storage runs roughly $700–$1,000 per usable kWh standalone, less per kWh bundled. Combined totals are Estimate — arithmetic from those blocks, not quotes. In every grid-tied case the ~$24/mo Base Services Charge, nonbypassable charges, and any true-up remain payable — no option produces a literal $0 PG&E bill.

(a) Purchased solar + battery — cash / loan

$40,000–$90,000 gross · rooftop

Estimate Mid-build 10–12 kW + 27–30 kWh ≈ $50,000–$70,000. Ground-mount +$8,000–$21,000; panel upgrade / trenching extra. Federal credit $0; SGIP $0 unless RSSE-eligible. Loan adds interest over 10–25 yrs.

Bill offset Estimate: ~70–90% of energy charges if sized to load and the battery dispatches into 4–9 p.m. Simple payback ~8–12 yrs at PG&E rates per one published 2026 guide for an 8 kW + ~13 kWh build; larger resilience batteries lengthen bill-only payback.

Outage: whole-home while the battery lasts; solar recharges daily. 27 kWh ≈ 2–3 days of disciplined essentials (well, fridge, Starlink, lights, limited HVAC) Estimate; under a day if the hot tub / full HVAC run freely.

  • You own it — all savings and future incentives are yours
  • No escalator, no transfer friction on sale
  • Property-tax exclusion if completed in 2026
  • Largest upfront capital — and 2026 is the most expensive purchase year in a decade, with no 30% credit
  • Maintenance and inverter replacement (~yr 12–15) are yours
  • Payback is sensitive to your actual evening load

(b) Solar lease — provider owns it

$0 down · monthly payment

Solar-only CA marketplace average ~$142/mo (range $74–$269 for ~8.4 kW) Published, EnergySage Oct 2026. Solar + 20–40 kWh battery will price materially higher — $200–$350/mo Estimate. Escalator 0–3%/yr Published range.

Bill offset: the payment replaces most of the energy charge; net saving depends entirely on payment + escalator vs your bill — Estimate modest day-one saving, eroding if the escalator exceeds ~2%.

Outage: only if the lease includes a battery with backup enabled — many solar leases historically did not. Confirm backup (not just bill-credit) operation in writing.

  • Only route that still monetizes the federal 30% (§48E to the provider)
  • Provider owns maintenance / insurance; predictable payment
  • Prepaid variant can mimic ownership economics
  • You own nothing for 20–25 years
  • Escalator compounds — 2.9% ≈ +33% by year 10
  • Transfer / buyout friction when selling; provider must still be performing in year 15; §48E pass-through is partial and opaque — demand the cash-price comparison

(c) PPA — provider owns it, you buy its kWh

$0.17–$0.32 /kWh starting · shopping band

Published ranges $0.12–$0.31/kWh (EnergySage, 25-yr typical), $0.17–$0.27 (one CA provider guide, May 2026), $0.25–$0.32 (NRG, Aug 2026). Escalator 0–2.99%/yr.

Bill offset: you still pay PG&E for all non-solar hours at E-ELEC prices plus fixed charges. PPA kWh are cheap only if rate + escalator stays below PG&E's blended price — Estimate similar to a lease; best case is a 0%-escalator PPA.

Outage: same caveat as a lease — backup exists only if a battery is in the PPA and configured for it.

  • No maintenance; pay only for production
  • §48E pass-through; performance risk sits with the provider
  • 20–25-year contract on your roof; production guarantees vary
  • Per-kWh rate can apply to all production including low-value midday exports in some structures — read how export credits are assigned
  • Home-sale transfer

(d) Battery-only + stay on PG&E

$24,000–$30,000 · 27 kWh installed

Published range for 2× Powerwall 3 class; ~40 kWh ≈ $35,000–$45,000 Estimate. No federal credit; SGIP $0 (general market closed).

Bill offset: small. The E-ELEC arbitrage spread is ~22¢ in summer (55.2¢ peak vs 33.4¢ off-peak) but only ~4¢ in winter (32.1¢ vs 28.5¢) — Estimate a few hundred dollars a year for most homes. The purchase is resilience, not savings.

Outage: excellent for hours to ~2 days of essentials, then dead until the grid returns — no recharge source in a multi-day PSPS. Can time-shift well-pump / hot-tub loads.

  • Lowest complexity; no array, no NBT export math
  • Pairs later with solar — choose a solar-ready platform
  • Worst dollars-per-benefit if bought for bill savings
  • Still pays full PG&E energy prices; battery wears cycling for small arbitrage

The resilience-optimal design for this house

(e) Hybrid — solar + battery + propane standby generator

Cost: option (a) plus the generator — 22 kW Generac-class $10,000–$16,000 installed, 24–26 kW $12,000–$18,000+ Published. Propane tank upsizing, if needed, is extra and unquoted in the research. The generator adds no bill savings — but it may allow a smaller battery than a battery-only multi-day design, partially offsetting its cost Estimate.

Outage: best available. The battery carries the house silently and handles solar self-consumption daily; the generator auto-starts for multi-day PSPS, carries HVAC + well + hot tub together, and recharges the battery / lets solar keep working. Runtime = propane supply — days to weeks with a large tank Estimate, tank-dependent.

  • Only option covering all three goals: bill, evening peak, multi-day outage
  • On propane the generator keeps its full nameplate kW (a “22 kW” unit is ~19.5 kW on natural gas, 22 kW on LP) — no natural-gas service is, for once, an advantage
  • FranklinWH and Generac integrate a generator natively
  • The wood fireplace further stretches fuel in winter outages
  • Highest capital and maintenance — annual generator service, exercise cycles, significant propane burn at load (get gal/hr at 50% load in writing)
  • Most complex permitting: electrical + gas + setbacks + noise; three systems to maintain

The 2026 head-to-head that matters if you have cash

Cash purchase vs prepaid lease/PPA. Multiple 2026 sources report prepaid structures priced below the cash price of the same system because the §48E credit is priced in upfront (one published example: ~$16,000–$18,000 prepaid for a 7.2 kW system vs a higher cash price), with ownership typically transferring after ~5 years. Get both quoted like-for-like — and have a lawyer/CPA read the transfer, warranty, and buyout terms. Whatever you quote, force every offer onto one page: cash price, payment/rate, escalator, production guarantee, backup capability (which loads, what kW), transfer/buyout schedule, and which entity claims §48E on what placed-in-service deadline.

5 · Try the envelope

A rough cost estimator — from the published building blocks only

Drag the sliders inside the research's reference envelope. Solar at EnergySage's October 2026 California average of $2.52/W; battery at the published $700–$1,000 per usable kWh; ground-mount premium at the published +$1.00–$1.50/W; generator at the published installed ranges. This is planning arithmetic, Estimate — not a quote, and it excludes panel upgrades, trenching beyond the mount premium, and propane tank work.

Mount

Propane standby generator

Indicative gross cost · before any incentive

$48,000 – $59,000

For a purchase in 2026, plan on $0 federal credit and $0 SGIP unless RSSE income-qualified — the gross figure above is likely the figure. Compare: the report's mid-build (10–12 kW + 27–30 kWh, rooftop) is $50,000–$70,000.

6 · Hardware landscape 2026

Five battery platforms, compared

Specs are manufacturers' published figures as compiled by 2026 comparison sources Published; installed prices are Estimate ranges from installer/marketplace guides, before incentives. Mind the generational trap: FranklinWH “aPower” (13.6 kWh / 5 kW) and “aPower 2” (15 kWh / 10 kW) are different products, as are Generac PWRcell vs PWRcell 2 and Enphase 5P vs the newer 10C — confirm the exact model on any quote.

PlatformUsable / unitContinuous / unitWhole-home backup & fit for this houseInstalled, 1 unit
Tesla Powerwall 313.5 kWh (LFP)11.5 kWYes — highest single-unit power in class; integrated solar inverter. 2 units = 27 kWh / 23 kW. Strongest simple answer for well-pump + HVAC starting loads. 10-yr warranty. DC-coupled solar, so panel-level shade needs string design care (optimizers / careful stringing).$12,000–$18,500
2 units $24,000–$30,000
Enphase IQ Battery 5P + IQ85.0 kWh (LFP)3.84 kWYes, with IQ System Controller / Meter Collar — but needs multiple units: 4× 5P = 20 kWh / ~15.4 kW; 6× = 30 kWh. AC-coupled. Best shade story: IQ8 microinverters make every panel independent — the natural fit for a tree-shaded roof, and for phased growth. 15-yr battery warranty is class-leading. Newer IQ Battery 10C (10 kWh / 7.08 kW) halves the box count — price both.$6,000–$9,000
per 5P unit
FranklinWH aPower 2 + aGate15 kWh (LFP)10 kW (15 kW peak, 10 s)Yes — aGate is a whole-home energy manager with circuit-level control. Built for exactly this use case: whole-home + native generator integration + solar-agnostic (works with any inverter brand, incl. Enphase strings). 15-yr / 60 MWh throughput warranty. Verify local installer depth in the Amador / El Dorado area.$15,000–$20,000
incl. aGate-class pricing in most guides
SolarEdge Home Battery (400V)9.7 kWh5 kW (7.5 kW peak)Partial-to-whole-home depending on stacking: up to 3 batteries per inverter (29.1 kWh / 15 kW class). DC-coupled, high efficiency; SolarEdge DC optimizers are a proven partial-shade solution. SolarEdge ecosystem only; a single battery's 5 kW is thin for simultaneous well pump + HVAC starts.~$10,000–$13,000
Generac PWRcell 29–18 kWh / cabinet (3 kWh modules)Up to 11.5 kW configuration-dependentYes, rated for whole-home up to 200A service. The ecosystem play for the hybrid: PWRcell + a Generac standby generator under one brand/app with native generator management. Confirm the exact configuration, module count, and inverter rating on the quote — headline specs assume the largest configuration (some sources list 5.2–10.5 kW by configuration).$12,500–$25,000
widest range — configuration matters most

Shaded site?

Enphase (microinverters) or SolarEdge (optimizers) lead on the solar side — every panel works independently of a shaded neighbour.

Multi-day PSPS + generator plan?

FranklinWH or Generac lead on integration — both manage a standby generator natively.

Maximum starting power, simplest pairing?

Tesla Powerwall 3 — 11.5 kW from a single unit, solar inverter built in.

Generators, in brief

Generac Guardian-class air-cooled standby units dominate this segment. Equipment with 200A automatic transfer switch: ~$5,500–$7,400 (22 kW) Published; fully installed $10,000–$16,000 (22 kW) and $12,000–$18,000+ (24–26 kW); Generac's own guidance puts a professionally installed home standby system at ~$8,000–$16,000 including the generator. Kohler and Briggs & Stratton are the credible alternates in the same band. Sizing note: 22–24 kW with load-shedding modules is the usual whole-home answer for a single-HVAC home with a well and hot tub — but a formal load calculation, not square footage, should set the size. All five battery platforms can do net-billing self-consumption scheduling; confirm the specific system's grid-charging and export settings allowed under PG&E's NBT interconnection approval, since not every configuration is authorised to export.

7 · Non-solar alternatives

Is there another utility? No — verified

Community Choice — none in Amador County

Pioneer Community Energy, the nearest CCA, serves unincorporated Placer and El Dorado counties plus Auburn, Colfax, Grass Valley, Lincoln, Nevada City, Placerville, Rocklin and Loomis today. Its October 2027 expansion adds 16 communities — Butte, Colusa, Glenn, Nevada, Sutter and Tuolumne counties and Chico, Colusa, Live Oak, Orland, Oroville, Sonora, Williams, Willows, Yuba City and Paradise. Amador County and Fiddletown are on neither list Published, official — verified live.

For completeness, the product you can't buy: Pioneer's board cut its generation rate 16% in January 2026, to a 10% discount vs PG&E's generation rate, effective March 1, 2026. Where a CCA exists, enrollment is automatic / opt-out, PG&E keeps delivery and billing, a PCIA exit-fee line applies, and CCA customers can do solar + net billing (Pioneer pays a +0.5¢/kWh premium over PG&E's net-surplus rate at true-up). None of it is actionable from Fiddletown unless Amador County joins or forms a CCA — a multi-year civic process, not a household decision.

Source: Pioneer — Expansion · Pioneer — Residential Rates · CPUC CCA FAQ

Municipal utility — none found

No publicly-owned electric utility serving Fiddletown was found in CPUC/CCA listings or Amador County sources reviewed. PG&E is the assigned investor-owned utility for the address, and California's regulated market doesn't let a household choose a different delivery utility. SMUD, Roseville Electric and the like don't reach Amador County.

What you can do without solar — free or cheap, now

  • Rate-plan optimisation on PG&E itself: model E-TOU-D vs E-TOU-C on your actual interval data. E-TOU-D's weekday-only 5–8 p.m. peak and 34.2¢ summer off-peak suit a home that can shift hot-tub and well loads; with a battery/heat pump, E-ELEC or EV2-A may model better.
  • CARE / FERA / Medical Baseline enrollment, if eligible.
  • The portable-generator/battery rebate — verify its current funding first (sources conflict, §3 above).
  • PG&E's Backup Power Transfer Meter programme for portable-generator users in Tier 2/3 / EPSS areas.

None of these changes the delivery utility or the outage exposure materially — they're complements to the solar/battery decision, not substitutes for it.

8 · Site & practical factors

Foothills realities: shade, fire, snow, permits, timelines

Roof vs ground-mount — shade decides

Rooftop is cheaper by $1.00–$1.50/W Published and stays inside the defensible-space envelope — but tree cover is the controlling fact here. Partial shade on a conventional string drags down the whole string; winter sun angles lengthen tree shadows (deciduous oaks help by leaf-drop; pines don't); roof age, pitch, and fire-code access pathways shrink usable area. Mitigations that work: module-level electronics (Enphase IQ8 microinverters or SolarEdge DC optimizers) plus a proper shade survey.

Ground-mount buys optimal tilt/azimuth in a clearing you choose, no roof-life coupling, easier cleaning and snow shedding, and expansion room. It costs the $/W premium, trenching/conduit to the house (distance-sensitive — get it line-itemed), possible grading, setbacks from property lines / septic / well / propane, and vegetation management under and around the array so it doesn't become a fire pathway — keep the pad gravel/noncombustible and surrounding fuel cleared.

Either way, demand a month-by-month shade/production model (drone + Solar Pathfinder / Solmetric-class survey or equivalent), not a single annual kWh number. Winter production is what charges the battery in PSPS season's shoulder months — a design that looks fine annually can be tree-crippled in December–January.

Your loads, sized honestly

  • Well pump (½ HP class): ~750–1,000 W running, 2,000–3,000 W starting surge. It's the surge, not the ~0.5–1 kWh/day, that sizes the inverter.
  • Starlink (standard kit): ~60 W, ~1.4 kWh/day at 24 h — trivial to run, and the reason the battery keeps the home online through a PSPS.
  • Hot tub — the swing load: get the heater nameplate kW off the unit. Heating a tub through an outage can consume a large fraction of a 27 kWh battery in an evening, so most designs put it on a managed/shed circuit or a “generator-only” rule.
  • HVAC: check compressor starting amps (LRA on the nameplate) against the battery's surge rating; a soft-start kit is a cheap, routine foothill fix.
  • Rule of thumb Estimate: disciplined essentials ≈ 8–12 kWh/day; whole-home unmanaged ≈ 25–40+ kWh/day. That gap is the entire sizing argument for 27–40 kWh + load management.
  • Wood fireplace: a genuine resilience asset — in a winter outage it carries space heat with zero electric load except a small blower (typically a few hundred watts if fitted Estimate), materially extending battery runtime. A winter PSPS is easier on this home than a summer one, when HVAC is electric.

Snow & wildfire

Fiddletown sits at roughly 1,700 ft — snow is occasional rather than alpine, but it happens, and racking must be engineered to the site's design snow/wind loads. Amador County Building states the 2025 California Building Codes apply to all submittals on or after January 1, 2026. Ask the county for the parcel's ground snow load rather than accepting a valley-floor default; steeper ground-mount tilt sheds snow faster. Batteries/inverters belong on a noncombustible wall/pad with code clearances; the generator needs its manufacturer/CARB clearances; propane setbacks interact with array and trench placement. Confirm Amador Fire Protection District expectations early — in a Tier 2/3 district, fire review is not a formality.

Permitting — Amador County

Fiddletown is unincorporated, so the authority is the Amador County Building Department (Jackson): online permitting via its eProcess360 portal (emailed submittals no longer accepted), inspections via hotline. A solar + battery + generator project is typically building + electrical permits, the generator adding gas/mechanical and fire review, a ground-mount adding structural and possibly grading review.

Could not verify: a solar-specific expedited checklist or SolarAPP+ instant-permit offering on the county site. State SB 379 automated-permitting mandates phased in for larger jurisdictions; a small county may still run manual plan review — budget days-to-weeks, and have the installer confirm the current process and fees in writing.

Source: Amador County Building Department

Interconnection — PG&E Rule 21

A separate approval from the county permit, via PG&E's Your Projects portal, ending in Permission to Operate (PTO) — the system may not legally export before PTO. Tariff clocks Published: completeness ~10 business days; Initial Review ~15 business days after validation; Supplemental Review (only if screens fail) ~+20 business days; PTO typically 5–10 business days after complete final electrical clearance, stated maximum ~30 business days. Clean residential jobs are commonly described at 2–6 weeks for the interconnection leg and 6–12 weeks signed-contract-to-PTO overall in 2026 installer guides Published estimates.

File interconnection in parallel with county permitting, not after installation. And note: “installation completed” (property-tax exclusion) and “PTO granted” are different events — ask both the installer and the Assessor which date controls the January 1, 2027 exclusion.

Sources: GreenLancer — PG&E Rule 21 · SunDocket — PG&E (compiled from tariff)

9 · Recommended sequence

Next steps, in order

The research's recommended sequence — the first three are free, and step 1 gates everything else.

  1. This week — pull the data (free)Download 12 months of interval usage from PG&E (Green Button / Share-My-Data); photograph the main panel, well-pump plate, hot-tub plate, HVAC nameplate, and propane tank plate. Nothing else can be priced honestly until this exists.
  2. Check the two eligibility wildcards (free, before quotes)(i) RSSE/SGIP income qualification — any chance the household is ≤80% AMI or otherwise RSSE-eligible, get on the waitlist and learn its pre-installation reservation rules; (ii) CARE/FERA/Medical Baseline eligibility. Also verify the PG&E portable backup rebate's current funding if a portable unit interests you.
  3. Decide the completion-year question with the AssessorCall the Amador County Assessor: confirm a system completed in 2026 keeps the §73 exclusion until ownership change, what “completed” means for their roll (final inspection? PTO?), and how a 2027 system would be assessed. This determines whether a 2026 deadline is worth paying a premium for.
  4. Get the shade answer before choosing roof vs groundRequire a site shade survey with monthly production modelling for both a rooftop and a ground-mount design. The cheaper mount is the one with the better winter production per dollar, not the lower $/W.
  5. Solicit three like-for-like quotes on one specification sheetE.g. “10–12 kW, 27–30 kWh, whole-home backup incl. well pump + HVAC (soft start if needed), hot tub on managed circuit, generator-ready” — each quoted three ways: (i) cash purchase, (ii) prepaid lease/PPA with ownership-transfer terms, (iii) monthly lease/PPA at 0% escalator. Require: cash price, escalator, production guarantee, backup loads/kW, §48E safe-harbor status and placed-in-service deadline (TPO quotes), interconnection filing commitment, PTO timeline.
  6. If resilience is the priority, price the generator with the solar, not afterA FranklinWH or Generac-integrated design — or a generator-ready transfer arrangement — is cheaper planned than retrofitted. Get propane consumption (gal/hr at 50% load) and tank-endurance math in the quote.
  7. Do the free PG&E move in parallelRun PG&E's rate-plan comparison on the interval data (E-TOU-C vs E-TOU-D now; E-ELEC once a battery exists). A plan switch costs nothing and starts saving before any hardware arrives.
  8. Do not signAny contract that (a) claims a 30% federal credit on a 2026 purchase, (b) counts a general-market SGIP rebate, (c) has a >0% escalator without a quantified justification, or (d) cannot state its §48E deadline in writing. Verify the installer's CSLB licence (C-10/C-46 as applicable) before any deposit.

10 · Honest gaps

Open questions — and what couldn't be verified

No responsible sizing answer exists without your actual data. These are stated plainly, exactly as the research left them.

Needs your data

  1. Annual and monthly kWh, and the 4–9 p.m. load shape in summer and winter — sets solar kW, battery kWh, and the E-ELEC bill model. Monthly totals alone can't size a battery.
  2. HVAC type/fuel and tonnage; hot-tub heater kW and usage pattern; well-pump HP — sets inverter surge requirements and which loads get managed/shed.
  3. Longest actual outage experienced / target endurance in days — decides battery-only vs hybrid-with-generator, and propane tank sizing. “Multi-day” should be a number (2 days? 5?) first.
  4. Main panel capacity/condition (200A?) and distances for trenching — swing items of $2,000–$10,000+ on any quote Estimate.
  5. Cash available vs financing preference, and expected tenure in the home — decides purchase vs prepaid-lease vs PPA, and how heavily to weigh the property-tax exclusion's “until ownership change” benefit.
  6. Income-program eligibility (CARE/FERA/RSSE) — the only remaining route to a five-figure incentive.
  7. Roof age/condition vs ground-mount clearing location — decides mount type after the shade survey. Plus: current rate plan, baseline territory, propane tank size/ownership (leased tanks restrict who may fill / attach a generator line), and the address's actual PSPS/outage history.

Could not verify in this research

  • A solar-specific permitting checklist, fee schedule, or SolarAPP+ availability for Amador County.
  • The exact current funded status of PG&E's portable Generator & Battery Rebate — sources conflict (open with a Dec 31, 2026 deadline vs reported full/closed in August 2026).
  • PG&E's NBT26 hourly ACC export price file for a 2026 interconnection vintage — the mechanism and ranges are sourced; the parcel-specific 8,760-value file was not pulled. Any serious quote should model from that file.
  • Whether the specific parcel is HFTD Tier 2 or Tier 3 — confirm via the CPUC HFTD map / PG&E wildfire map for the exact address.
  • DAC-SASH disadvantaged-community tract status for the address.
  • Local (Amador / El Dorado foothill) installer depth and lead times for FranklinWH and Generac PWRcell 2 specifically — platform choice may be constrained by who will actually service the system within a reasonable drive.

Appendix

Sources

All sources read 31 October 2026 unless a publication/update date is shown. “Verified live” = opened and read during the research; “index” = search-index excerpt, cross-checked for load-bearing claims. Figures flagged Published come from a cited source; Estimate figures are planning ranges derived from published unit prices — not quotes.

  1. PG&E residential TOU prices, Advice Letter 7846-E eff. Mar 1, 2026 — ratereliefca.com/blog/pge-time-of-use-rates-2026
  2. PG&E rates tracker, updated Oct 28, 2026 — nrgcleanpower.com/learning-center/pge-rate-increase/
  3. PG&E official: Base Services Charge, March 2026 — pge.com — restructured electric bill
  4. IRS: Residential Clean Energy Credit (verified live) — irs.gov/credits-deductions/residential-clean-energy-credit
  5. IRS FS-2025-05 / §48E summaries — solarfundingusa.com · legalclarity.org · morkelfinancial.com
  6. SGIP Incentive Step Tracker, data as of 10/28/2026 — pdp.selfgenca.com/home/program_metrics/
  7. SGIP closure / RSSE explainers — solarwithwatts.com/sgip · wattbuild.com · nrgcleanpower.com
  8. CA BOE Letter to Assessors 2026/034, Sep 1, 2026 — boe.ca.gov/proptaxes/pdf/lta26034.pdf
  9. Property-tax extension failure (AB 2389) — mccalmont.net/incentives/california/
  10. Pioneer Community Energy: Expansion — pioneercommunityenergy.org/expansion/ (verified live)
  11. Pioneer: Residential Rates — pioneercommunityenergy.org/residential-rates/ · March 1, 2026 rate sheets (PDF)
  12. CPUC: Consumer Information on CCAs — FAQ — cpuc.ca.gov — CCA FAQ
  13. EnergySage: California solar panel cost, Oct 2026 — energysage.com/local-data/solar-panel-cost/ca/
  14. EnergySage: Amador County electricity — energysage.com/local-data/electricity-cost/ca/amador-county/
  15. Net Billing Tariff mechanics — Assembly analysis of AB 942 (PDF) · exspenditure.com/solar/california-solar-incentives/ · Energy Toolbase — charge-type laning · greenlancer.com/post/nem-3-0
  16. Solar cost blocks — smartenergyusa.com — ground-mount premium · a1solarstore.com — $/W and battery $/kWh · nrgcleanpower.com — solar financing CA · ocsolar.com — is solar worth it, CA 2026
  17. Hardware specs/prices — nuwattenergy.com — Powerwall 3 review · heliosenergyglobal.com — Powerwall 3 cost 2026 · poweroutage.us — battery comparison · theenergycollective.com · solarenergysimplified.com — best solar batteries 2026
  18. Standby generator costs — gardenfrontier.com · udpwr.com — Generac generator cost 2026 · electriciansanangelo.com
  19. Amador County Building Department — amadorgov.org/departments/building
  20. PG&E Rule 21 timelines — greenlancer.com/post/pg-e-rule-21-interconnection · sundocket.com/wiki/pge.html
  21. Load benchmarks: well pump / Starlink — buckhorncliffs.com · paravolta.com — appliance wattage chart
  22. PG&E portable Generator & Battery Rebate (conflicting availability) — exspenditure.com/pge-generator-rebate/ vs udpwr.com — CA portable power station rebates (Aug 27, 2026)
  23. PG&E solar buyback explainer — goldenstatesolarguide.com/pge-solar-buyback-rate-2026